> For the complete documentation index, see [llms.txt](https://streambuddies2.felineentity.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://streambuddies2.felineentity.com/assets/stream-buddies-2-settings.md).

# Stream Buddies 2 Settings

An explainer on every aspect of the Stream Buddies 2 Setting Asset.

### Physics and Movement

<figure><img src="https://1693557609-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F7oowhN4HFDtKmcHKVKlT%2Fuploads%2FWatDCeuRxlDmj9unDzDg%2Fimage.png?alt=media&amp;token=314e672b-30dc-4f32-8a95-dcae7d2c5e81" alt=""><figcaption></figcaption></figure>

This section changes how your Buddies move when given a Goal with the Set Buddy Goal Node.

**Speed** sets how much forward force a Buddy applies when moving. When walking this will be applied forwards, when flying this will be applied directly towards the goal.

**Turn Speed** determines how fast a Buddy turns towards a Goal. The faster they can turn the easier it will be for them to reach their goal when walking, but it might look less natural if it's too fast.

**Gravity Strength** determines how much downward force is applied to every Buddy. Lower values makes it easier for Buddies to move around and jump, and they will float slower when falling. Higher values may look more natural when falling, but will make it harder for Buddies to move around. Flying Buddies ignore Gravity entirely.

**Mass** determines how hard it is for other objects to move a Buddy. Lower values makes them easier to shove around by things like thrown props, while higher values make it harder for them to be moved against their will, so to speak.

**Drag** determines how much "air resistance" a Buddy experiences. Lower values will make a Buddy slide around more when stopping and potentially overshoot their Goal. Higher values make them stop faster, but also make them slower overall.

**Flying** determines whether a Buddies Walk or Fly by default.

**Flying Break Force** is similar to Drag, but it will only applied to Flying Buddies that have reached their Goal. This is to help them stop and not overshoot their target while also letting them fly without huge amounts of resistance.

**Use Prop Colliders** determines whether a Buddy will use the default Buddy capsule collider or use the colliders of their Prop instead. Unless your Prop was specifically designed for use as a Buddy, it's best to leave this off.

### Default Buddy Settings

<figure><img src="https://1693557609-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F7oowhN4HFDtKmcHKVKlT%2Fuploads%2FM93msgfODL958TVaUgjt%2Fimage.png?alt=media&amp;token=510737ab-e5cc-4a31-a0b0-1168eb57f4fa" alt=""><figcaption></figcaption></figure>

This section sets default values for Buddies.

**Default Buddy Prop** is the default Prop a Buddy will spawn with. New Buddies that haven't been given a specific Prop will use this as their Default. Make sure to set this or they may not spawn!

**Default Spawn Point** is the place new Buddies will be spawned into the Scene at if no Custom Spawn Point has been set.

**Default Buddy Size** is a unified Scale all Buddies start with. Changing this will change the current scale of all spawned in Buddies on the fly!

### Nameplate

<figure><img src="https://1693557609-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F7oowhN4HFDtKmcHKVKlT%2Fuploads%2Fk4qfc57OecYbsaZUsPnb%2Fimage.png?alt=media&amp;token=4fc4a773-eb72-454b-b536-76e0f3445c3f" alt=""><figcaption></figcaption></figure>

The settings change the look of the Buddies Nameplate.

**Font Size** changes the size of the text in the Nameplate.

**Default Font Color** changes the color tint of the text.

**Default Outline Color** changes the Outline Color.

**Height Offset** changes how high or low the text appears relative to the Buddy's feet.

### Animation

<figure><img src="https://1693557609-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F7oowhN4HFDtKmcHKVKlT%2Fuploads%2FxoFUoEXOGpDaQzzkfncx%2Fimage.png?alt=media&amp;token=70eec08a-01c4-46ac-8420-cef476608a62" alt=""><figcaption></figcaption></figure>

This part changes how newly spawned Buddies are animated.

**Use Animation** determines whether to animate new Buddies or not.

**Use Prop Animator** checks for an Animator on a newly spawned Buddy, and if it exists, use that instead of using generic animations for the Buddy.

### Buddy Information

<figure><img src="https://1693557609-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F7oowhN4HFDtKmcHKVKlT%2Fuploads%2FG3TWHnbbOATcG6Swe2cS%2Fimage.png?alt=media&amp;token=4deb3ec4-ff21-47b2-9de8-caa089a14ca9" alt=""><figcaption></figcaption></figure>

Here you can manage all your Buddies.

**Spawn All Buddies** will spawn all the Buddies from the Buddy List at the Default Spawn point. (If there are a lot of Buddies, they might explode in all directions!)

**Despawn All Buddies** removes all Buddies from the Scene while keeping them in the Buddy List.

**Reload Buddy List** reloads all available Buddies, which may be necessary when you added or removed Buddies through Blueprints.

You can Add or Remove Buddies manually with the Icons at the Bottom of the Buddy List if you want premade Buddies, otherwise we recommend using Blueprints!

### Individual Buddy Settings

Here you can adjust an individual Buddy's settings!

**Prop** sets their currently shown Prop.

**Name** is their identifying name, useful for referencing inside Blueprints.

**Display** Name determines what is shown on their Nameplate.

**Size Multiplier** multiplier the their size based on the Default Buddy Size. So a Multiplier of 2 makes them double the size of other Buddies.

**Spawn Buddy** spawns the Buddy into the Scene at the Default Spawn Point.

**Despawn Buddy** removes the Buddy from the Scene, but keeps it in the List.

**Anchor** attaches a buddy to an Anchor Asset in the scene. The Buddy will take on the position, rotation and Scale of the Anchor and not move until unanchored. Setting the Anchor to empty will remove the Anchor again.

**Scaling** allows for scaling of the Buddy along individual axis. Note that extreme values may break movement or animations.

All the following Options are Overrides that can be enabled by clicking the checkbox next to their value. Only checked Options come into effect, and will ignore the global values until unchecked.
